Injection speed is one of the most critical parameters in the injection molding process. It directly controls the flow state of plastic melt in the mold cavity, affecting shear heat, filling balance,
2026/03/23 Injection Molding
Sliders are core mechanisms in plastic molds for demolding side holes, undercuts, and concave-convex structures. The rationality of their design directly affects mold life, production stability, and p
2026/03/21 Plastic Molds
PEEK (Polyetheretherketone) is a high-performance special engineering plastic, widely used in medical, aerospace, automotive, and semiconductor fields for its high temperature resistance, strength, co
2026/03/19 Plastic Molds
Injection molds are the core equipment for plastic injection production, and their quality directly determines product precision, appearance, production stability, and service life. Currently, the ind
2026/03/19 Injection Mold
In injection molding production, the drying of plastic raw materials is a critical process that directly affects part appearance, mechanical properties, and production stability. Hygroscopic materials
2026/03/18 Injection Molding
HDPE (High-Density Polyethylene) is one of the most widely used general thermoplastics, valued for its high toughness, corrosion resistance, low-temperature performance, and good flowability. It is co
2026/03/17 Plastic Injection Molding
As a high-performance special engineering plastic, PEEK requires an injection temperature of 360–400°C and mold temperature of 180–220°C. It has high melt viscosity and is often reinforced with glass
2026/03/16 Plastic Molds
Plastic mold development is a systematic and process-oriented project. From product analysis to mass production delivery, each step directly determines mold precision, service life and plastic part qu
2026/03/16 Plastic Mold